(Dec-2025) Get professional help from our Category-7A-General-and-Household-Pest-Control Dumps PDF
Give You Free Regular Updates on Category-7A-General-and-Household-Pest-Control Exam Questions
NEW QUESTION # 11
The two modes of action for the pesticide product TEMPRID are:
- A. Contact and systemic
- B. Combined neurotoxin only
- C. Mist or foam
Answer: A
Explanation:
TEMPRID SC contains two active ingredients: imidacloprid and beta-cyfluthrin. Imidacloprid acts as a systemic insecticide, being absorbed by the pest and affecting its nervous system over time, while beta- cyfluthrin acts as a contact insecticide, killing pests on direct exposure by disrupting nerve function.
The TEMPRID SC label and theGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 6: Pesticide Types) describe these dual modes of action, which make TEMPRID effective against a wide range of pests. Option B (combined neurotoxin only) is partially correct but does not specify the contact and systemic nature. Option C (mist or foam) refers to application methods, not modes of action.
NEW QUESTION # 12
The application records for general and household pesticide use must be kept for a minimum of:
- A. Five years
- B. Three years
- C. Two years
Answer: B
Explanation:
NJDEP regulations (N.J.A.C. 7:30-6.8) require commercial pesticide applicators to maintain application records for a minimum of three years. These records must include details like the date, location, pesticide used, amount applied, and target pest. This applies to Category 7A applications for general and household pest control. Option A (five years) is incorrect, though some states may have longer requirements. Option C (two years) is too short for New Jersey standards.
NEW QUESTION # 13
To help prevent pesticide resistance, IPM suggests:
- A. Routine preventative spraying
- B. Use of multiple components in the control of a pest population
- C. Increased dosage to knock out initial infestation
Answer: B
Explanation:
Pesticide resistance occurs when pests develop tolerance to a pesticide due to overuse. IPM strategies, as outlined in theGeneral Pest Management: Guide for Commercial Applicators - Category 7A (Chapter 4: IPM), recommend using multiple components (e.g., rotating pesticide classes, incorporating non-chemical methods like sanitation or traps) to control pests and reduce resistance risk. Option A (routine spraying) increases resistance by overexposing pests to the same chemical. Option C (increased dosage) can exacerbate resistance and is not an IPM practice.
NEW QUESTION # 14
___ toxicity has become an important issue to pesticide applicators based on their repeated use or exposure to pesticides.
- A. Chronic
- B. Acute
- C. Periodic
Answer: A
Explanation:
Chronic toxicity refers to the adverse effects of long-term, repeated exposure to a pesticide, which is a significant concern for applicators who handle pesticides regularly. This can lead to health issues like cancer, neurological disorders, or reproductive problems, as noted in theGeneral Pest Management:
Guide for Commercial Applicators - Category 7A(Chapter 3: Pesticide Safety). Option B (acute toxicity) refers to effects from a single, high-dose exposure, which is less relevant to repeated use.
Option C (periodic) is not a recognized term in toxicology.
NEW QUESTION # 15
For an indoor application for cockroaches, the suggested application method is to:
- A. Spray entire area at a low pressure under 50 psi
- B. Use a coarse low-pressure spray and treat entry points, feeding and hiding areas, and cracks and crevices
- C. Use a coarse spray at 80 psi and apply to entire floor area
Answer: B
Explanation:
For cockroach control indoors, the TEMPRID SC label and theGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 7: Cockroaches) recommend using a coarse low- pressure spray to treat specific areas where cockroaches are active, such as entry points, feeding and hiding areas, and cracks and crevices. This targeted approach ensures effective control while minimizing pesticide use. Option B (spray entire area) is incorrect, as broadcast treatments are not recommended for cockroaches indoors; spot or crack-and-crevice treatments are more effective.
Option C (coarse spray at 80 psi) is incorrect, as 80 psi is too high for indoor applications, risking overspray and dispersal of pests.
NEW QUESTION # 16
The "recipe" used to mix the pesticide includes the:
- A. Total amount of pesticide concentrate and diluent
- B. Rate per given area
- C. Percentage of water used
Answer: A
Explanation:
The "recipe" for mixing a pesticide refers to the specific instructions for preparing the pesticide solution, which includes the total amount of pesticide concentrate (active ingredient) and diluent (e.g., water or another carrier) to achieve the correct concentration for application. This is detailed on the pesticide label and in theGeneral Pest Management: Guide for Commercial Applicators - Category 7A (Chapter 5: Pesticide Application). Option B (percentage of water) is incorrect because the label specifies amounts, not percentages. Option C (rate per given area) refers to the application rate, not the mixing recipe.
NEW QUESTION # 17
Pesticide toxicity caused by a one-time exposure to a pesticide is referred to as:
- A. Acute toxicity
- B. Chronic toxicity
- C. Systemic toxicity
Answer: A
Explanation:
Acute toxicity refers to the adverse effects resulting from a single, short-term exposure to a pesticide, such as during an application. This can cause immediate symptoms like dizziness, nausea, or skin irritation, as explained in theGeneral Pest Management: Guide for Commercial Applicators - Category
7A(Chapter 3: Pesticide Safety). Option A (chronic toxicity) involves long-term exposure. Option C (systemic toxicity) refers to effects on the entire body but is not specific to one-time exposure.
NEW QUESTION # 18
To apply pesticides within a school building for roaches or flies requires a ___ license.
- A. 3A and 3B
- B. 7B
- C. 3B or 7B
- D. 7A and 13
Answer: D
Explanation:
Applying pesticides for roaches or flies inside a school building falls under Category 7A (General and Household Pest Control), which covers the management of pests like roaches, flies, and other household insects in structures, including schools. Additionally, because the application is in a school, Category 13 (School IPM) certification is required in New Jersey to comply with the School Integrated Pest Management Act (N.J.A.C. 7:30-13). Category 13 ensures applicators follow specific IPM protocols and notification requirements in educational settings. Option A (3B or 7B) is incorrect because 3B is for turf pest control, and 7B is for termites/wood-destroying insects, neither of which apply to roaches or flies.
Option B (3A and 3B) involves ornamental and turf pest control, which is irrelevant here. Option D (7B) is also incorrect as it does not cover general pests like roaches or flies.
NEW QUESTION # 19
The second most common cause of pesticide poisoning to applicators is:
- A. Dermal exposure
- B. Fire
- C. Inhalation
Answer: C
Explanation:
The second most common cause of pesticide poisoning for applicators is inhalation, as pesticides can be inhaled as vapors, mists, or dusts during mixing or application, especially in enclosed spaces. The General Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 3: Pesticide Safety) notes that inhalation exposure often follows dermal exposure (the most common cause, see Question 18) in frequency. Option A (fire) is not a common cause of poisoning, though it poses other risks. Option C (dermal exposure) is the most common cause, not the second.
NEW QUESTION # 20
Lice infestations are best treated by a:
- A. Heat treatment
- B. Residual pesticide treatment
- C. Doctor or public health official
Answer: C
Explanation:
Lice infestations (e.g., head lice) are a public health concern and are best treated by a doctor or public health official using FDA-approved pediculicides or non-chemical methods like combing. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 7: Lice) notes that lice treatments are typically medical, not structural pest control, and fall outside the scope of Category 7A applicators. Option B (residual pesticide treatment) is not appropriate for lice on humans. Option C (heat treatment) may be used for items like bedding but not directly for lice infestations on people.
NEW QUESTION # 21
The certified commercial pesticide applicator responsible for a commercial pesticide operator must be able to be at the application site within a reasonable amount of time, meaning:
- A. Three hours
- B. Eight hours
- C. 24 hours
Answer: A
Explanation:
In New Jersey, the NJDEP Pesticide Control Program outlines the responsibilities of a certified commercial pesticide applicator supervising a pesticide operator. According to NJDEP regulations (N.J.A.C. 7:30-6.2), a certified applicator must be able to respond to the application site within a
"reasonable amount of time" if they are not physically present. The definition of "reasonable" in this context is clarified in training materials and NJDEP guidance as being within three hours to ensure proper oversight, especially in case of emergencies or issues during application. This aligns with the need for timely supervision to ensure compliance with safety and application standards for general and household pest control under Category 7A. Eight hours or 24 hours would be too long to address potential issues effectively, such as spills, misapplications, or safety concerns.
NEW QUESTION # 22
Power sprayers are not used for:
- A. Termite applications
- B. Exterior perimeter and lawn applications
- C. Interior house ant and roach applications
Answer: C
Explanation:
Power sprayers are designed for high-volume applications over large areas, such as exterior perimeter and lawn applications (Option B) or termite applications (Option C), where large amounts of pesticide are needed. However, they are not suitable for interior house ant and roach applications (Option A), as these require precise, low-volume treatments (e.g., crack-and-crevice applications) using handheld sprayers, as noted in theGeneral Pest Management: Guide for Commercial Applicators - Category 7A (Chapter 5: Pesticide Application).
NEW QUESTION # 23
Notification requirements for multi-family residents require:
- A. The post-application decal notice in each unit
- B. A decal notice in each unit prior to the application
- C. Decal notification in all entryways to the building
Answer: C
Explanation:
For multi-family residences, NJDEP regulations (N.J.A.C. 7:30-9.13) require decal notification in all entryways to the building to inform residents of pesticide applications. This ensures visibility for all tenants without requiring individual unit notices. Option A (decal in each unit prior) is not required, though advance notice to tenants is. Option C (post-application decal in each unit) is impractical and not mandated; post-application notices are typically posted in common areas.
NEW QUESTION # 24
The Consumer Information Notice must contain the:
- A. Commercial applicator's license number and phone number
- B. Business license number
- C. Applicator business name, address, and phone number
Answer: C
Explanation:
The Consumer Information Notice, required by NJDEP (N.J.A.C. 7:30-9.13), must include the applicator business name, address, and phone number to provide residents with contact information for inquiries or concerns. Option A (applicator's license number) is not required on the notice, though the business license number may be included. Option B (business license number) is not a mandatory element of the notice, though it may be displayed on the vehicle.
NEW QUESTION # 25
___ pressure is suggested for indoor use with a handheld sprayer.
- A. High
- B. Low
- C. A power sprayer and high
Answer: B
Explanation:
For indoor applications with a handheld sprayer, low pressure is recommended to minimize overspray and reduce the risk of pesticide drift onto non-target areas, such as furniture or food surfaces. The General Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 5: Pesticide Application) advises using low-pressure settings (typically under 50 psi) for indoor crack-and-crevice or spot treatments. Option A (high pressure) and Option B (power sprayer and high) are more suited for outdoor or large-scale applications, not indoor household pest control.
NEW QUESTION # 26
Silverfish feed on:
- A. Starch materials associated with paper, books, and wallpaper
- B. Wool or cotton fabrics
- C. Grain found in kitchen areas
Answer: A
Explanation:
Silverfish are known to feed on starch materials like paper, books, and wallpaper, as well as starchy foods. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 7:
Silverfish) notes that they are common in damp areas and can damage household items containing starch or glue. Option A (grain) is more typical of pantry pests like weevils. Option B (wool or cotton) is associated with clothes moths, not silverfish.
NEW QUESTION # 27
To get the most effective control of rats using poison baits, you need to:
- A. Reduce or eliminate food sources
- B. Place the baits out at night and remove them at dawn
- C. Place the baits out at dawn and remove them at night
Answer: A
Explanation:
Effective rat control with poison baits requires reducing or eliminating food sources to ensure rats are attracted to the bait rather than alternative food. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 8: Rodents) emphasizes this IPMapproach, as rats will ignore baits if other food is available. Option A and Option B (placing/removing baits at specific times) are impractical and less effective, as rats are nocturnal but may feed at other times.
NEW QUESTION # 28
......
Achieve the Category-7A-General-and-Household-Pest-Control Exam Best Results with Help from OCPE Certified Experts: https://www.exams-boost.com/Category-7A-General-and-Household-Pest-Control-valid-materials.html