[Jun 28, 2026] Fortinet FCP_FWF_AD-7.4 Real Exam Questions and Answers FREE
Pass Fortinet FCP_FWF_AD-7.4 Exam Info and Free Practice Test
NEW QUESTION # 16
Refer to the exhibits.
FortiGate is pushing the POST parameters shown in the exhibit to the external captive portal server The wireless client redirection fails because certificate validation occurred while loading the web page The wireless client browser uses the FortiGate self-signed certificate to access secured web pages The SSID on FortiGate has the captive portal setting What could cause the certification validation error on the wireless client?
- A. The FortiGate IP address in the POST parameters is using a numerical IP address
- B. The captive portal setting in the authentication setting is set to use FQDN as the captive portal type
- C. The external server address is not the FQDN address
- D. The used credential is not embedded in the captive portal parameters
Answer: A
NEW QUESTION # 17
If you're looking to deploy FortiAP devices through a cloud platform, which tool would you use?
Response:
- A. FortiPlanner
- B. FortiPresence
- C. FortiGate integrated wireless controller
- D. FortiAP Cloud
Answer: D
NEW QUESTION # 18
Which action does a wireless client or the access point take when the wireless client moves away from an associated AP until the signal drops?
- A. The wireless client increases its signal power to continue connecting to the same AP
- B. The associated AP sends an alert message to the wireless client about the signal drop
- C. The wireless client disconnects and connects to a different, available AP
- D. The associated AP marks the wireless client as disconnected and must not reconnect
Answer: C
NEW QUESTION # 19
Which factor is the best indicator of wireless client connection quality?
Response:
- A. The receive signal strength (RSS) of the client at the AP
- B. Upstream link rate, the connection rate for the client to the AP
- C. Downstream link rate, the connection rate for the AP to the client
- D. The channel utilization of the channel the client is using
Answer: B
NEW QUESTION # 20
Refer to the exhibit.
A new security policy is made by the IT department to prevent direct communication between wireless stations There is one SSID configured in bridge mode Which statement is correct as a plan of action to update the wireless network configuration?
- A. Block intra-SSID traffic on the wireless network
- B. Create unique SSIDs for each FortiAP device
- C. Add an upstream layer 3 device on each FortiAP device
- D. Drop all local traffic in the wireless network
Answer: A
NEW QUESTION # 21
Which two statements are correct about FortiAP and rogue APs? (Choose two.)
- A. FortiAP detects rogue APs on dedicated monitoring radios
- B. FortiAP offers automatic suppression of rogue APs when broadcasting SSIDs
- C. FortiAP suppresses detected rogue APs manually
- D. FortiAP scans rogue APs in the background while broadcasting SSIDs
Answer: A,D
NEW QUESTION # 22
What are the benefits of using SSID hiding in a wireless network?
(Select all that apply)
Response:
- A. Reducing the visibility of the network to unauthorized users
- B. Preventing casual scanning of the network
- C. Enhancing wireless signal strength
- D. Allowing automatic connection for authorized devices
Answer: A,B
NEW QUESTION # 23
Which tool is used to deploy FortiAP devices through a cloud platform?
Response:
- A. FortiPlanner
- B. FortiPresence
- C. FortiGate
- D. FortiAP Cloud
Answer: D
NEW QUESTION # 24
When configuring bridge mode on FortiAP devices, which options should be considered?
(Select all that apply)
Response:
- A. Enabling load balancing
- B. Configuring traffic flow between wired and wireless networks
- C. Setting up VLANs for traffic segmentation
- D. Disabling SSID broadcast
Answer: B,C
NEW QUESTION # 25
Advanced bridge mode options on FortiAP devices allow for direct communication between wireless and wired networks.
Response:
- A. False
- B. True
Answer: B
NEW QUESTION # 26
Which of the following tools cannot act as a standalone wireless controller?
Response:
- A. FortiPresence
- B. FortiAP Cloud
- C. FortiPlanner
- D. FortiGate
Answer: C
NEW QUESTION # 27
A wireless station successfully connects to a wireless network and fails to communicate with other devices on the network or access the internet. As an administrator, what two pieces of information must you collect to troubleshoot the issue?
(Choose two.)
Response:
- A. Verify whether the DHCP scope has an available IP address to assign.
- B. Confirm that the wireless client is compatible with FortiAP technology.
- C. Monitor whether the wireless network is experiencing high-level noise or distortion.
- D. Check the wireless station signal status with FortiAP.
Answer: A,D
NEW QUESTION # 28
Which issues should be investigated when troubleshooting wireless performance problems?
(Select all that apply)
Response:
- A. RF interference
- B. Client signal strength
- C. SSID broadcast frequency
- D. DHCP lease time
Answer: A,B,C
NEW QUESTION # 29
When securing a wireless environment, which measures can help prevent unauthorized access?
Response:
- A. MAC address filtering
- B. Regularly changing the network name (SSID)
- C. Using strong encryption like WPA3
- D. Enabling a guest network
Answer: A,C
NEW QUESTION # 30
How can poor roaming capabilities between APs affect wireless clients in an office environment?
Response:
- A. Improved connection stability
- B. Enhanced wireless signal strength
- C. Frequent disconnections
- D. Increased throughput
Answer: C
NEW QUESTION # 31
Which tool is most useful for gathering information about wireless network performance issues on FortiGate?
Response:
- A. FortiPlanner
- B. FortiPresence
- C. FortiAP Cloud
- D. RF spectrum analyzer
Answer: D
NEW QUESTION # 32
Which of the following features distinguishes FortiPresence from FortiPlanner?
Response:
- A. FortiPresence is used primarily for network threat detection.
- B. FortiPlanner is a cloud-based deployment tool.
- C. FortiPresence provides analytics solutions.
- D. FortiPlanner is used as a wireless controller.
Answer: C
NEW QUESTION # 33
What are the benefits of using FortiPresence analytics in a wireless network?
(Select all that apply)
Response:
- A. Gaining insights into user behavior and footfall patterns
- B. Enhancing wireless signal strength
- C. Monitoring and suppressing rogue APs
- D. Providing real-time data for decision-making
Answer: A,D
NEW QUESTION # 34
......
Latest FCP_FWF_AD-7.4 Exam Dumps Fortinet Exam: https://www.exams-boost.com/FCP_FWF_AD-7.4-valid-materials.html
New 2026 Latest Questions FCP_FWF_AD-7.4 Dumps - Use Updated Fortinet Exam: https://drive.google.com/open?id=1jf4AqVl3pyLoRd8hRpfNgSa3grqHHM_n