[2022] Free JN0-334 Exam Dumps to Pass Exam Easily
JN0-334 Exam Dumps, JN0-334 Practice Test Questions
Conclusion
There’s never a perfect time to make a career-changing decision. But this is certainly the best time to get ahead in your career using a reputable certification that will validate your competency in managing Juniper Networking solutions and products. It is a big decision that starts with choosing the right designation, preparing for the required exam, and passing it. And that exam today is the Juniper JN0-334, which covers all the aspects you need to build a fruitful career. This post has attempted to cover everything you need to know to clear JN0-334 exam. So, the remaining percentage is solely a personal decision. Make it happen today!
NEW QUESTION 25
Click the Exhibit button.
You have an IPsec tunnel between two devices. You clear the IKE security associations, but traffic continues to flow across the tunnel.
Referring to the exhibit, which statement is correct in this scenario?
- A. The traffic is no longer encrypted
- B. The IPsec security association is independent from the IKE security association
- C. The traffic is using an alternate path
- D. The IKE security association immediately reestablishes
Answer: A,B
NEW QUESTION 26
You are asked to convert two standalone SRX Series devices to a chassis cluster deployment. You must ensure that your IPsec tunnels will be compatible with the new deployment.
In this scenario, which two interfaces should be used when binding your tunnel endpoints? (Choose two.)
- A. ge
- B. lo0
- C. reth
- D. pp0
Answer: A,C
NEW QUESTION 27
You want to use Sky ATP to protect your network, however, company policy does not allow you to send any files to the cloud. Which Sky ATP feature should you use in this situation?
- A. Only use cloud-based Sky ATP file blacklists.
- B. Only use on-box SRX anti-malware file scanning
- C. Only use on-premises local Sky ATP server anti-malware file scanning.
- D. Only use cloud-based Sky ATP file hash lookups
Answer: A
NEW QUESTION 28
Which statement is true about high availability (HA) chassis clusters for the SRX Series device?
- A. HA clusters must use NAT to prevent overlapping subnets between the nodes
- B. There can be active/passive or active/active clusters
- C. Cluster nodes require an upgrade to HA compliant Routing Engines.
- D. Cluster nodes must be connected through a Layer 2 switch
Answer: B
NEW QUESTION 29
Click the Exhibit button.
Which two statements describe the output shown in the exhibit? (Choose two.)
- A. Redundancy group 1 was administratively failed over.
- B. Node 0 is passing traffic for redundancy group 1.
- C. Node 1 is passing traffic for redundancy group1.
- D. Redundancy group 1 experienced an operational failure.
Answer: A,C
NEW QUESTION 30
Click to the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. Interface ge-0/0/1.0 will respond to pings.
- B. Interfaces ge-0/0/0.0 and ge-0/0/1.0 will allow SSH connections.
- C. Interface ge-0/0/0.0 will respond to pings.
- D. Interface ge-0/0/0 will not accept SSH connections.
Answer: A,B
NEW QUESTION 31
Which two statements are true about virtualized SRX Series devices? (Choose two.)
- A. cSRX cannot be deployed in routed mode.
- B. vSRX can be deployed in transparent mode
- C. vSRX cannot be deployed in transparent mode -
- D. cSRX can be deployed in routed mode.
Answer: B,C
NEW QUESTION 32
Click the Exhibit button.
Referring to the configuration shown in the exhibit, which two statements are true? (Choose two.)
- A. The syslog is configured for an info facility.
- B. The log is being sent to a remote server.
- C. The log is being stored on the local Routing Engine.
- D. The syslog is configured for a user facility.
Answer: B,D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/syslog-edit-system.html
NEW QUESTION 33
You are asked to convert two standalone SRX Series devices to a chassis cluster deployment. You must ensure that your IPsec tunnels will be compatible with the new deployment In this scenario: which two interfaces should be used when binding your tunnel endpoints? (Choose two)
- A. lo0
- B. reth
- C. ge
- D. pp0
Answer: A,B
NEW QUESTION 34
Which default protocol and port are used for JIMS to SRX client communication?
- A. RPC over TCP, port 135
- B. WMI over TCP; port 389
- C. HTTPS over TCP: port 443
- D. ADSI over TCP; port 389
Answer: C
NEW QUESTION 35
What are two examples of RTOs? (Choose two.)
- A. control link heartbeats
- B. session table entries
- C. IPsec SA entries
- D. fabric link probes
Answer: B,C
Explanation:
The data plane software creates RTOs for UDP and TCP sessions and tracks state changes. It also synchronizes traffic for IPv4 pass-through protocols such as Generic Routing Encapsulation (GRE) and IPsec. https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-chassis-cluster-data-plane-interfaces.html#id-45975
NEW QUESTION 36
Click the Exhibit button.
You need to have the JATP solution analyzer .jar, .xls, and .doc files.
Referring to the exhibit, which two file types must be selected to accomplish this task? (Choose two.)
- A. library
- B. Java
- C. executable
- D. document
Answer: A,D
NEW QUESTION 37
What are two examples of RTOs? (Choose two.)
- A. control link heartbeats
- B. fabric link probes
- C. session table entries
- D. IPsec SA entries
Answer: A,B
NEW QUESTION 38
You must configure JSA to accept events from an unsupported third-party log source.
In this scenario, what should you do?
- A. Configure a universal device service module.
- B. Separate event collection and flow collection on separate collectors.
- C. Configure an RPM for a third-party device service module.
- D. Configure JSA to silently discard unsupported log types.
Answer: A
NEW QUESTION 39
You must block the lateral spread of Remote Administration Tools (RATs) that use SMB to propagate within the network, using the JATP solution.
Which action would accomplish this task?
- A. Configure YARA rules.
- B. Configure a new anti-virus configuration rule.
- C. Configure whitelist rules
- D. Configure the SAML settings.
Answer: A
NEW QUESTION 40
Click the Exhibit button.
Referring to the configuration shown in the exhibit, which two statements are true? (Choose two.)
- A. The syslog is configured for a userfacility.
- B. The syslog is configured for an infofacility.
- C. The log is being sent to a remote server.
- D. The log is being stored on the local Routing Engine.
Answer: A,C
NEW QUESTION 41
You are asked to improve resiliency for individual redundancy groups in an SRX4600 chassis cluster. Which two features would accomplish this task? (Choose two.)
- A. control link recovery
- B. IP address monitoring
- C. dual fabric links
- D. interface monitoring
Answer: B,D
NEW QUESTION 42
Which two statements are correct about server-protection SSP proxy? (Choose two.)
- A. The server-protection SSL proxy forwards the server certificate after modification.
- B. The server-protection SSL proxy is also known as SSL reverse proxy.
- C. The server-protection SSL proxy intercepts the server certificate.
- D. The server-protection SSL proxy acts as the server from the client's perspective.
Answer: B,D
NEW QUESTION 43
Exhibit.
You need to have the JATP solution analyze jar, xls, and doc files
Referring to the exhibit, which two file types must be selected to accomplish this task? (Choose two.)
- A. library
- B. Java
- C. executable
- D. document
Answer: C,D
NEW QUESTION 44
What are two valid JIMS event log sources? (Choose two )
- A. Microsoft Windows Server 2012 audit logs
- B. Microsoft Active Directory audit logs
- C. Microsoft Exchange Server event logs
- D. Microsoft Active Directory server event logs
Answer: A,C
NEW QUESTION 45
Click to the Exhibit button.
Referring to the exhibit, what does proxy ARP allow?
- A. the internal network to ARP for the public address of the server
- B. the external network to ARP for the public address of the server
- C. the internal network to ARP for the internal address of the server
- D. the external network to ARP for the internal address of the server
Answer: C
NEW QUESTION 46
Exhibit.
The output shown in the exhibit is displayed in which formal?
- A. sd-syslog
- B. syslog
- C. WELF
- D. binary
Answer: B
NEW QUESTION 47
After performing a software upgrade on an SRX5800 chassis cluster, you notice that node1 is in the primary state and node0 is in the backup state. Your network standards dictate that node0 should be in the primary state.
In this scenario, which command should be used to comply with the network standards?
- A. request chassis cluster failover redundancy-group 254 node 1
- B. request chassis cluster failover redundancy-group 254 mode 0
- C. request chassis cluster failover redundancy-group 0 node 1
- D. request chassis cluster failover redundancy-group 0 node 0
Answer: D
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-chassis-cluster- redundancy-group-failover.html
NEW QUESTION 48
What are two examples of RTOs? (Choose two.)
- A. control link heartbeats
- B. session table entries
- C. fabric link probes
- D. IPsec SA entries
Answer: A,B
NEW QUESTION 49
......
Juniper JN0-334 Exam Topics:
| Section | Objectives |
|---|---|
| Juniper Identify Management Service (JIMS) | Identify concepts, general features, or functionality of JIMS
Demonstrate knowledge of how to configure, monitor, or troubleshoot JIMS |
| Application Security | Identify application security concepts
Demonstrate knowledge how to configure, monitor, or troubleshoot application security Identify application IDP/IDS concepts
Demonstrate knowledge how to configure, monitor, or troubleshoot IDP/IDS |
| Advance Threat Prevention (ATP) | Identify the concepts, benefits, or operation of Sky ATP
Demonstrate knowledge of how to configure, monitor, or troubleshoot Sky ATP Identify the concepts, benefits, or operation of JATP
Demonstrate knowledge of how to configure, monitor, or troubleshoot JATP |
| SSL Proxy | Identify concepts, general features, or functionality of SSL Proxy
Demonstrate knowledge of how to configure, monitor, or troubleshoot SSL proxy |
| Virtual SRX or cSRX | Describe concepts, general features, or functionality of virtualized security using vSRX or cSRX
|
| Security Policies (Advanced) | Identify the concepts, benefits, or operation of security policies
Demonstrate knowledge of how to configure, monitor, or troubleshoot security policies |
| High Availability (HA) Clustering | Identify the concepts, benefits, or operation of HA
Demonstrate knowledge of how to configure, monitor, or troubleshoot clustering |
| Juniper Secure Analytics (JSA) | Identify concepts, general features, or functionality of JSA
|
Basic Exam Facts
The JNCIS-SEC, or simply the Juniper JN0-334, is a validation that’s administered by Pearson VUE. It has a duration of 90 minutes and carries 65 multiple-choice questions. Juniper always grades the exam-takers on a pass/fail basis and they strongly advise that candidates must have a working knowledge of the Juniper Junos Software Release 19.1 before attempting this test.
JN0-334 Exam Dumps, JN0-334 Practice Test Questions: https://www.exams-boost.com/JN0-334-valid-materials.html