CheckPoint 156-315.81 Certification Exam Dumps with 616 Practice Test Questions
New 156-315.81 Exam Dumps with High Passing Rate
To earn the Check Point Certified Security Expert R81 certification, candidates must pass a single exam that covers a range of topics, including advanced firewall architectures, VPNs, intrusion prevention systems, and more. 156-315.81 exam is designed to assess a candidate's ability to design, implement and manage complex security solutions, as well as troubleshoot issues related to network security. Passing the CheckPoint 156-315.81 certification exam demonstrates that a candidate has the skills and knowledge to effectively secure networks and protect them against advanced threats.
CheckPoint 156-315.81 certification is a valuable credential for security professionals who want to demonstrate their expertise in managing and maintaining Check Point security solutions. By passing the exam, individuals can gain recognition for their skills and knowledge, which can lead to career advancement opportunities and increased earning potential. To prepare for the exam, candidates can take advantage of a range of training courses and study materials offered by Check Point.
Earning the Check Point Certified Security Expert R81 certification is an excellent way for IT professionals to demonstrate their expertise and credibility in the field of network security. Check Point Certified Security Expert R81 certification is recognized globally and is highly valued by employers, making it an excellent career move for security professionals. By passing the 156-315.81 exam, candidates can prove their proficiency in Check Point technologies and security management, opening up new job opportunities and higher earning potential.
NEW QUESTION # 330
Which utility allows you to configure the DHCP service on Gaia from the command line?
- A. sysconfig
- B. cpconfig
- C. ifconfig
- D. dhcp_ofg
Answer: A
Explanation:
Explanation
The utility that allows you to configure the DHCP service on Gaia from the command line is sysconfig. This utility provides a menu-based interface for configuring various system settings, including network interfaces, routing, DNS, NTP, SNMP, SSH, etc. One of the options in sysconfig is DHCP Server Configuration, which allows you to enable or disable the DHCP service, define DHCP scopes, set lease time, etc. References: Gaia Administration Guide R81, page 29.
NEW QUESTION # 331
You plan to automate creating new objects using new R81 Management API. You decide to use GAIA CLI for this task.
What is the first step to run management API commands on GAIA's shell?
- A. login user admin password teabag
- B. mgmt_admin@teabag > id.txt
- C. mgmt_login
- D. mgmt_cli login user "admin" password "teabag" > id.txt
Answer: C
Explanation:
Explanation
You plan to automate creating new objects using new R81 Management API. You decide to use GAIA CLI for this task.
The first step to run management API commands on GAIA's shell is mgmt_login. This command allows you to login to the management server and obtain a session ID, which is required for running other management API commands. You can also specify the user name and password as parameters, or enter them interactively.
The session ID is stored in the file $CPDIR/tmp/.api_session by default, unless you specify a different file name. References: R81 Management API Reference Guide, page 15.
NEW QUESTION # 332
Which member of a high-availability cluster should be upgraded first in a Zero downtime upgrade?
- A. The Primary Member
- B. The Active Member
- C. The Standby Member
- D. The Secondary Member
Answer: C
Explanation:
Explanation
In a Zero downtime upgrade, you should upgrade the Standby Member first. This is because the Standby Member does not process traffic and can be upgraded without affecting the cluster availability. After upgrading the Standby Member, you can perform a failover and make it the Active Member. Then you can upgrade the original Active Member, which becomes the Standby Member after the failover.
References: Getting Started - Check Point Software, section "Upgrading Cluster Members with Zero Downtime"
NEW QUESTION # 333
The following command is used to verify the CPUSE version:
- A. HostName:0>show installer build
- B. [Expert@HostName:0]#show installer status build
- C. [Expert@HostName:0]#show installer status
- D. HostName:0>show installer status build
Answer: D
Explanation:
Explanation
The correct command to verify the CPUSE (Check Point Update Service Engine) version is:
Option B is incorrect because it uses the "[Expert@HostName:0]#" prompt, which is typically used for expert mode commands, but the CPUSE version can be checked using the "show installer status build" command in standard mode.
Option C is incorrect because it uses the "[Expert@HostName:0]#" prompt, and while it includes the "build" parameter, it's not the standard command to check the CPUSE version.
Option D is incorrect because it uses the "HostName:0>" prompt, but it lacks the "show" command and uses
"build" instead of "status build."
References: Check Point Certified Security Expert R81 documentation
NEW QUESTION # 334
Selecting an event displays its configurable properties in the Detail pane and a description of the event in the Description pane. Which is NOT an option to adjust or configure?
- A. Severity
- B. Threshold
- C. Automatic reactions
- D. Policy
Answer: D
NEW QUESTION # 335
Fill in the blank: A ________ VPN deployment is used to provide remote users with secure access to internal corporate resources by authenticating the user through an internet browser.
- A. Client-based remote access
- B. Direct access
- C. Clientless direct access
- D. Clientless remote access
Answer: D
NEW QUESTION # 336
What is the minimum amount of RAM needed for a Threat Prevention Appliance?
- A. It depends on the number of software blades enabled
- B. 8GB with Gaia in 64-bit mode
- C. 6 GB
- D. 4 GB
Answer: D
NEW QUESTION # 337
You want to gather data and analyze threats to your mobile device. It has to be a lightweight app. Which application would you use?
- A. SmartEvent Client Info
- B. Check Point Capsule Cloud
- C. Sandblast Mobile Protect
- D. SecuRemote
Answer: C
Explanation:
SandBlast Mobile Protect is a lightweight app for iOS and Android™ that gathers data and helps analyze threats to devices in your environment.
https://www.checkpoint.com/downloads/products/how-sandblast-mobile-works-solution-brief.pdf
NEW QUESTION # 338
Why would an administrator see the message below?
- A. A new Policy Package created on both the Management and Gateway will be deleted and must be backed up first before proceeding.
- B. A new Policy Package created on the Management is going to be installed to the existing Gateway.
- C. A new Policy Package created on the Gateway is going to be installed on the existing Management.
- D. A new Policy Package created on the Gateway and transferred to the Management will be overwritten by the Policy Package currently on the Gateway but can be restored from a periodic backup on the Gateway.
Answer: B
Explanation:
Explanation
A Policy Package is a set of rules and settings that define how a Security Gateway enforces security on traffic that passes through it. A Policy Package can be created on either the Management Server or the Security Gateway, but it must be installed on both to take effect. When a new Policy Package is created on the Management Server, it must be installed on an existing Security Gateway that has a different Policy Package installed. The message below warns the administrator that installing a new Policy Package will overwrite the existing one on the Security Gateway.
https://www.bing.com/images/blob?bcid=qMoRhR0dzSkGmg
The message also advises the administrator to back up their existing configuration before proceeding with the installation.
NEW QUESTION # 339
To fully enable Dynamic Dispatcher on a Security Gateway:
- A. run fw ctl multik set_mode 9 in Expert mode and then Reboot.
- B. run fw multik set_mode 1 in Expert mode and then reboot.
- C. Edit/proc/interrupts to include multik set_mode 1 at the bottom of the file, save, and reboot.
- D. Using cpconfig, update the Dynamic Dispatcher value to "full" under the CoreXL menu.
Answer: A
Explanation:
Explanation
To fully enable Dynamic Dispatcher on a Security Gateway, you need to run the following command in Expert mode then reboot:
This command sets the multi-core mode to 9, which means that Dynamic Dispatcher is enabled without Firewall Priority Queues. Dynamic Dispatcher is a feature that optimizes the performance of Security Gateways with multiple CPU cores by dynamically allocating traffic to different cores based on their load and priority. Dynamic Dispatcher can improve the throughput and scalability of the Security Gateway, especially for traffic that is not accelerated by SecureXL. The other commands are not valid or do not enable Dynamic Dispatcher. References: R81 Performance Tuning Administration Guide
NEW QUESTION # 340
Which process handles connection from SmartConsole R81?
- A. cpm
- B. fwm
- C. cpmd
- D. cpd
Answer: A
Explanation:
Explanation
The CPM process handles connection from SmartConsole R81. The CPM process is the main process of the Security Management Server and the Multi-Domain Security Management Server. It is responsible for managing the database, handling policy installation, communicating with SmartConsole clients, and providing REST API services. The CPM process runs on port 19009 and uses the CPD process as a proxy for communication with other processes.
References:
Check Point Processes and Daemons, section "CPM"
Check Point R81, section "SmartConsole"
Check Point R81.20, section "REST API"
NEW QUESTION # 341
As a valid Mobile Access Method, what feature provides Capsule Connect/VPN?
- A. You can make sure that documents are sent to the intended recipients only.
- B. Full Layer3 VPN -IPSec VPN that gives users network access to all mobile applications.
- C. Fill Layer4 VPN -SSL VPN that gives users network access to all mobile applications.
- D. That is used to deploy the mobile device as a generator of one-time passwords for authenticating to an RSA Authentication Manager.
Answer: B
Explanation:
Explanation
The feature that provides Full Layer3 VPN -IPSec VPN, giving users network access to all mobile applications, is the correct answer.
Capsule Connect/VPN is used to establish secure VPN connections for mobile devices, and the Full Layer3 VPN (IPSec VPN) option provides comprehensive network access.
References: Check Point documentation or training materials related to Mobile Access Methods and VPN configurations.
NEW QUESTION # 342
What are the two ClusterXL Deployment options?
- A. Unicast and Multicast Mode
- B. Distributed and Standalone
- C. Broadcast and Multicast Mode
- D. Distributed and Full High Availability
Answer: D
NEW QUESTION # 343
Which of the following is an identity acquisition method that allows a Security Gateway to identify Active Directory users and computers?
- A. Account Unit Query
- B. User Directory Query
- C. Active Directory Query
- D. UserCheck
Answer: C
NEW QUESTION # 344
SandBlast Mobile identifies threats in mobile devices by using on-device, network, and cloud-based algorithms and has four dedicated components that constantly work together to protect mobile devices and their dat a. Which component is NOT part of the SandBlast Mobile solution?
- A. Gateway
- B. Management Dashboard
- C. Personal User Storage
- D. Behavior Risk Engine
Answer: C
NEW QUESTION # 345
Which of the following blades is NOT subscription-based and therefore does not have to be renewed on a regular basis?
- A. Application Control
- B. Anti-Virus
- C. Advanced Networking Blade
- D. Threat Emulation
Answer: C
Explanation:
Explanation
The Advanced Networking Blade is not subscription-based and therefore does not have to be renewed on a regular basis. The Advanced Networking Blade is a software blade that provides advanced routing capabilities for Check Point Security Gateways. It supports dynamic routing protocols such as OSPF, BGP, RIP, and PIM, as well as features such as Policy-Based Routing (PBR), Multicast Routing, and IPv6 support. The Advanced Networking Blade is included in the Next Generation Firewall (NGFW) package and does not require a separate license.
NEW QUESTION # 346
Which CLI command will reset the IPS pattern matcher statistics?
- A. ips reset pmstat
- B. ips pmstats reset
- C. ips pstats reset
- D. ips pmstats refresh
Answer: B
NEW QUESTION # 347
The CPD daemon is a Firewall Kernel Process that does NOT do which of the following?
- A. Transfers messages between Firewall processes
- B. Secure Internal Communication (SIC)
- C. Pulls application monitoring status
- D. Restart Daemons if they fail
Answer: C
Explanation:
Explanation
The CPD daemon is a Firewall Kernel Process that does not pull application monitoring status. The CPD daemon is responsible for Secure Internal Communication (SIC), restarting daemons if they fail, transferring messages between Firewall processes, and managing policy installation. References: CPD process
NEW QUESTION # 348
SmartEvent has several components that function together to track security threats. What is the function of the Correlation Unit as a component of this architecture?
- A. Connects with the SmartEvent Client when generating threat reports.
- B. Correlates all the identified threats with the consolidation policy.
- C. Analyzes each log entry as it arrives at the log server according to the Event Policy. When a threat pattern is identified, an event is forwarded to the SmartEvent Server.
- D. Collects syslog data from third party devices and saves them to the database.
Answer: C
NEW QUESTION # 349
You had setup the VPN Community VPN-Stores'with 3 gateways. There are some issues with one remote gateway(1.1.1.1) and an your local gateway. What will be the best log filter to see only the IKE Phase 2 agreed networks for both gateways
- A. action:"Key Install- AND 1.1.1.1 ANDQuick Mode
- B. Blade:"VPN" AND VPN-Stores AND Main Mode
- C. action:"Key Install" AND 1.1.1.1 AND Main Mode
- D. Blade:"VPN" AND VPN-Stores AND Quick Mode
Answer: A
Explanation:
Explanation
The best log filter to see only the IKE Phase 2 agreed networks for both gateways is B. action:"Key Install" AND 1.1.1.1 AND Quick Mode1. This filter will show you the logs that indicate the successful establishment of IKE Phase 2, which is also known as Quick Mode2. In this phase, the Security Gateway and the remote gateway negotiate the IPSec Security Associations (SAs) and exchange the encryption keys for the VPN tunnel2. The action:"Key Install" field shows that the SAs were installed successfully3. The 1.1.1.1 field shows that the logs are related to the remote gateway with that IP address3. The Quick Mode field shows that the logs are related to IKE Phase 2, as opposed to Main Mode, which is IKE Phase 13. To use this filter, you need to go to SmartConsole, open SmartLog, and enter the filter expression in the search box3.
References: How to troubleshoot VPN issues with IKEVIEW tool - Check Point Software, IPsec and IKE - Check Point Software, SmartLog R81.10 Administration Guide - Check Point Software
NEW QUESTION # 350
......
Get 156-315.81 Braindumps & 156-315.81 Real Exam Questions: https://www.exams-boost.com/156-315.81-valid-materials.html
CheckPoint 156-315.81 Actual Questions and Braindumps: https://drive.google.com/open?id=10FxLAHfABzeTeOXNr2s7JlScMQmLvrmu