[Feb-2022] Free GB0-341-ENU Exam Dumps to Improve Exam Score
2022 Realistic GB0-341-ENU Dumps Exam Tips Test Pdf Exam Material
NEW QUESTION 26
How many APs can be managed by WX3010 at most?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 27
What are the design methods of wlan combination system? (Multiple choice)
- A. Under normal circumstances, there cannot be more than 1 WLAN signal on the main path of the combined system, which will cause mutual interference of WLAN signals and fail to demodulate.
- B. For a distributed deployment design with the same environment layout on each floor, a uniform and symmetrical antenna feeder design can be selected. For example, the combined location of each floor, the number of APs, the number of couplers and power splitters, and the device specifications can all be unified
- C. When adding AP joint points on the original indoor sub-system, if the original system has power amplifier equipment, the AP joint position should be selected behind the power amplifier device.
- D. There are two ways to expand the capacity of the combined system. One is to modify the antenna at the end of the system, insert a combiner, and add APs; the other is to use a dedicated WLAN dual AP combiner
Answer: A,B,C,D
NEW QUESTION 28
When the wireless controller is doing local mac authentication, the user name and password must be configured as the mac address of the wireless client. The letter form in the mac address of the username and password is ____.
- A. Both username and password are uppercase
- B. The username is lowercase and the password is uppercase
- C. The username is uppercase and the password is lowercase
- D. Both username and password are lowercase
Answer: D
NEW QUESTION 29
Which of the following operations can be the easiest and most effective way to avoid interference in the AP working environment?
- A. Replace the AP antenna
- B. Adjust AP working channel
- C. Adjust the VLAN attributes of the SSID
- D. Restart the AP device
Answer: B
NEW QUESTION 30
In order to prevent the wired access switch from being struck by lightning during the implementation of the WLAN project, what should be adopted? (Multiple choice)
- A. AP side network port lightning protection unit
- B. Lightning protector for network port
- C. AP and wired network are connected by optical fiber
- D. Antenna-fed lightning arrester
Answer: B,C
NEW QUESTION 31
Whether the wireless terminal roams or not depends on the client-driven ruling mechanism. For the Inter wireless network card, when the "roaming initiative" is set to _____, the wireless client will not switch sensitively, and only switch when the link quality drops To another access point.
- A. Lowest value
- B. Any value
- C. Default value
- D. Highest value
Answer: A
NEW QUESTION 32
Regarding the precautions in the wireless network survey and design process, which of the following statement is correct? (Multiple choice)
- A. When configuring AP frequency points, first perform frequency detection on the target area, and avoid using channels that are already used by APs in the coverage area.
- B. When measuring the penetration loss of the AP signal from obstacles such as walls, the incident angle of the AP signal needs to be considered.
- C. In the WLAN project, it is necessary to understand the materials of the building and various surrounding substances through on-site surveys, and to estimate its influence on the wireless signal, so as to determine the safe installation location of the WLAN equipment.
- D. When configuring the frequency point of outdoor AP coverage area, in order to achieve effective coverage of AP and avoid mutual interference between channels, follow the cellular coverage principle of the mobile communication system during channel allocation.
Answer: A,B,C,D
NEW QUESTION 33
Which of the following descriptions of C H3C wireless P AP series products are correct? (Multiple choice)
- A. WA2220-AG supports both 11a and 11g protocols, and has two radio frequency cards, which can work in both 11a and 11g modes at the same time
- B. WA2110-AG supports both 11a and 11g protocols, but it has only one radio frequency card and can only work in 11a or 11g mode.
- C. Currently only WA2600 series APs support 802.11n protocol
- D. WA2210-AG supports both 11a and 11g protocols, but it has only one radio frequency card and can only work in 11a or 11g mode.
Answer: A,B,C,D
NEW QUESTION 34
H HC 3C wireless controller can view the detailed information of P AP registration through the command "display wlan ap all verbose". The following output is the detailed information of an AP viewed through this command.
Based on the above information, you can know _________. (Multiple choice)
- A. There are currently no users on this AP because the Running Clients Count is 0.
- B. Last Join Address indicates the IP address used when the AP successfully established a link with the AC last time. When the AP is disconnected, you can try to telnet to the AP device through this address.
- C. Admin State is DOWN, indicating that the AP's radio may be in the disabled state.
- D. The model of this AP is WA2100-AG, the status is RUN (successfully registered), and the IP address is 192.168.0.125
- E. This AP has been registered and online for 42 minutes and 50 seconds. It can be judged whether this AP has been offline based on the running time of the wireless controller.
Answer: A,B,D,E
NEW QUESTION 35
Which of the following are not the shortcomings of FAT AP?
- A. No wireless controller required, can work independently
- B. FAT AP software is stored on the AP, and the software needs to be upgraded one by one when the software is upgraded, which requires a lot of maintenance work
- C. Each FAT AP only supports individual configuration, and the configuration of a large network requires a huge workload for AP configuration.
- D. The configuration of FAT AP is saved on the AP, the loss of AP equipment can cause the leakage of system configuration
Answer: A
NEW QUESTION 36
Which of the following descriptions of antenna gain are correct? (Multiple choice)
- A. The antenna gain selection should meet the requirements of the coverage scenario, not the larger the gain, the better
- B. The larger the antenna gain, the higher the convergence of the signal
- C. Outdoor long-distance coverage scenarios are suitable for directional antennas with a gain of more than 10dbi
- D. The larger the gain of the antenna, the better, using a large gain antenna can obtain greater transmission power
Answer: A,B,C
NEW QUESTION 37
According to the following configuration analysis: Assuming that the status of FIT AP (testap) is RUN, the wireless client can search for the SSID "H3C-WLAN" and can successfully access the wireless network.
- A. The client cannot obtain an IP address
- B. The client can obtain the IP address of 102.168.2.0/24 segment
- C. The client can obtain the IP address of the 192.168.0.0/24 segment
- D. The client can obtain the IP address of 10.1.1.0/24
Answer: B
NEW QUESTION 38
As a qualified surveyor, before conducting a wireless network survey, which of the following hardware needs to be prepared? (Multiple choice)
- A. Enterprise-class wireless network card, smart phone
- B. Long distance measuring ruler
- C. Wireless terminals used by customers in actual business
- D. ap depends on the recommended model of the project
Answer: A,B,C,D
NEW QUESTION 39
In the 802.11 series of standards, it is only limited to the description of the MAC layer and the PHY layer.
- A. True
- B. False
Answer: A
NEW QUESTION 40
C H3C wireless controller does C MAC authentication not only supports local authentication, but also can be realized with s Radius. The username and password are both ___.
- A. Client MAC
- B. 0
- C. H3C
- D. WX5002
Answer: A
NEW QUESTION 41
The interface type of external antenna is generally N type _____.
- A. Male
- B. Female
Answer: B
NEW QUESTION 42
Which of the following technologies are the key technologies used by n 802.11n? (Multiple choice)
- A. Short Gi
- B. OFDM-MIMO
- C. Channel Bundling
- D. Frame collection
Answer: A,B,C,D
NEW QUESTION 43
......
Powerful GB0-341-ENU PDF Dumps for GB0-341-ENU Questions: https://www.exams-boost.com/GB0-341-ENU-valid-materials.html