[May 21, 2024] Get Latest and 100% Accurate 350-401 Exam Questions
Maximum Grades By Making ready With 350-401 Dumps
Earning the Cisco 350-401 ENCOR certification demonstrates that you have the skills and knowledge necessary to implement and manage enterprise-level network infrastructure. It also shows that you are committed to staying up-to-date with the latest technologies and best practices in the industry. With this certification, you can open up new career opportunities and increase your earning potential as a network professional.
Cisco 350-401 certification exam is part of the new Cisco Enterprise Certification program, which was launched in 2020. The program is designed to equip IT professionals with the skills required to manage and secure enterprise networks. Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) certification is particularly valuable for network administrators, engineers, and architects who are responsible for planning, implementing, and maintaining enterprise network solutions. It provides a comprehensive understanding of the latest networking technologies and best practices, enabling candidates to stay competitive in today's fast-paced technology landscape.
NEW QUESTION # 374
What does the Cisco DMA REST response Indicate?
- A. Cisco DNA Center Is unable to communicate with cat9000-1
- B. Cisco DONA Center has the incorrect credentials for cat3000-1
- C. Cisco DNA Center has the Incorrect credentials for RouterASR-1
- D. Cisco DNA Center has the incorrect credentials for cat3850-1
Answer: B
NEW QUESTION # 375
Refer to the exhibit:
An engineer configures VRRP and issues the show commands to verify operation. What does the engineer confirm about VRRP group 1 from the output?
- A. Communication between VRRP members is encrypted using MD5
- B. R1 is primary if 10.10.1.1/32 is in its routing table
- C. If R1 reboots, R2 becomes the master virtual router until R2 reboots
- D. There is no route to 10.10.1.1/32 in R2's routing table
Answer: B
NEW QUESTION # 376
How are control traffic, client authentication and data traffic handled in a mobility express environment?
- A. Control traffic and client authentication is handled locally by each access point. Data traffic is switched centrally by the controller.
- B. Control traffic and client authentication is handled centrally by the controller. Data traffic is switched locally by the access points.
- C. Control traffic and client authentication is handled centrally by the controller. Data traffic is switched centrally by the controller.
- D. Control traffic and client authentication is handled locally by each access point. Data traffic is switched locally by the access points.
Answer: B
NEW QUESTION # 377
Refer to me exhibit.
Refer to the exhibit. An engineer attempts to configure a trunk between switch sw1 and switch SW2 using DTP, but the trunk does not form. Which command should the engineer apply to switch SW2 to resolve this issue?
- A. switchport mode dynamic desirable
- B. no switchport
- C. switchport nonegotiate
- D. switchport mode access
Answer: A
NEW QUESTION # 378
On which protocol or technology is the fabric data plane based in Cisco SD-Access fabric?
- A. IS-IS
- B. VXLAN
- C. Cisco TrustSec
- D. LISP
Answer: B
Explanation:
Explanation
The tunneling technology used for the fabric data plane is based on Virtual Extensible LAN (VXLAN). VXLAN encapsulation is UDP based, meaning that it can be forwarded by any IP-based network (legacy or third party) and creates the overlay network for the SD-Access fabric. Although LISP is the control plane for the SD-Access fabric, it does not use LISP data encapsulation for the data plane; instead, it uses VXLAN encapsulation because it is capable of encapsulating the original Ethernet header to perform MAC-in-IP encapsulation, while LISP does not. Using VXLAN allows the SD-Access fabric to support Layer 2 and Layer 3 virtual topologies (overlays) and the ability to operate over any IP-based network with built-in network segmentation (VRF instance/VN) and built-in group-based policy.
NEW QUESTION # 379
An engineer must configure the strongest password authentication to locally authenticate on a router. Which configuration must be used?
- A. username netadmin secret 5 $1$b1JUSkZbBS1Pyh4OzwXyZ1kSZ2
- B. username netadmin secret $15b1JuSk404850110QzwXyZ1k SZ2
- C. username netadmin secret 9 $9$vFpMfBelbRVV8SseX/bDAxtuV
- D. line Console 0
password $15b1Ju$
Answer: C
Explanation:
Scrypt is safer than MD5, so answer A is wrong and answer D is correct
R1(config)#username user secret ?
0 Specifies an UNENCRYPTED secret will follow
5 Specifies a MD5 HASHED secret will follow
8 Specifies a PBKDF2 HASHED secret will follow
9 Specifies a SCRYPT HASHED secret will follow
<0-9> Encryption types not explicitly specified
LINE The UNENCRYPTED (cleartext) user secret
LINE The UNENCRYPTED (cleartext) user secret
NEW QUESTION # 380
Based on this interface configuration, what is the expected state of OSPF adjacency?
- A. FULL/BDR on R1 and FULL/BDR on R2
- B. Full on both routers
- C. 2WAY/DROTHER on both routers
- D. not established
Answer: D
Explanation:
Explanation
On Ethernet interfaces the OSPF hello intervl is 10 second by default so in this case there would be a Hello interval mismatch -> the OSPF adjacency would not be established.
NEW QUESTION # 381
DRAG DROP
Drag each NTP command on the left to its effect on the right.
Select and Place:
Answer:
Explanation:
NEW QUESTION # 382
Which statement about an RSPAN session configuration is true?
- A. A filter must be configured for RSPAN sessions.
- B. A special VLAN type must be used as the RSPAN destination.
- C. Only one session can be configured at a time.
- D. Only incoming traffic can be monitored.
Answer: B
NEW QUESTION # 383
Refer to me exhibit.
Refer to the exhibit Remote users cannot access the Internet but can upload files to the storage server Which configuration must be applied to allow Internet access?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
NEW QUESTION # 384
Which authorization framework gives third-party applications limited access to HTTP services?
- A. OAuth 2.0
- B. Basic Auth
- C. GRE
- D. IPsec
Answer: A
Explanation:
The OAuth 2.0 authorization framework is a protocol that allows a user to grant a third-party web site or application access to the user's protected resources, without necessarily revealing their long-term credentials or even their identity.
NEW QUESTION # 385
Refer to the exhibit. Which configuration set implements Control Plane Policing for SSH and Telnet?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 386
Refer to the exhibit.
Cisco DNA Center has obtained the username of the client and the multiple devices that the client is using on the network. How is Cisco DNA Center getting these context details?
- A. Those details are provided to Cisco DNA Center by the Identity Services Engine
- B. The administrator had to assign the username to the IP address manually in the user database tool on Cisco DNA Center.
- C. User entered those details in the Assurance app available on iOS and Android devices
- D. Cisco DNA Center pulled those details directly from the edge node where the user connected.
Answer: D
Explanation:
Explanation
Features of the Cisco DNA Assurance solution includes Device 360 and client 360, which provides a detailed view of the performance of any device or client over time and from any application context. Provides very granular troubleshooting in seconds.
NEW QUESTION # 387
Which function does a fabric edge node perform in an SD-Access deployment?
- A. Connects the SD-Access fabric to another fabric or external Layer 3 networks
- B. Connects endpoints to the fabric and forwards their traffic
- C. Encapsulates end-user data traffic into LISP.
- D. Provides reachability border nodes in the fabric underlay
Answer: B
Explanation:
Explanation
There are five basic device roles in the fabric overlay:
+ Control plane node: This node contains the settings, protocols, and mapping tables to provide the endpoint-to-location (EID-to-RLOC) mapping system for the fabric overlay.
+ Fabric border node: This fabric device (for example, core layer device) connects external Layer
3 networks to the SDA fabric.
+ Fabric edge node: This fabric device (for example, access or distribution layer device) connects wired endpoints to the SDA fabric.
+ Fabric WLAN controller (WLC): This fabric device connects APs and wireless endpoints to the SDA fabric.
+ Intermediate nodes: These are intermediate routers or extended switches that do not provide any sort of SD-Access fabric role other than underlay services.
NEW QUESTION # 388
Refer to the exhibit.
What is the JSON syntax that is formed the data?
- A. Name', 'Bob Johnson,' 'Age', 76, 'Alive', true, 'favourite Foods' 'Cereal Mustard', 'Onions'}
- B. Name", "Bob Johnson", "Age": Seventysix, "Alive" true, "favourite Foods" ,[Cereal" "Mustard"
"Onions"}} - C. Name: Bob, Johnson, Age: 76, Alive: true, Favourite Foods. [Cereal, "Mustard", "Onions}}
- D. Name", "Bob Johnson", "Age", 76, "Alive", true, "favourite Foods", ["Cereal, "Mustard", Onions"}}
- E. {"Name":"Bob Johnson","age":76,"alive":true,"favorite
foods":["Cereal","Mustard","Onions"]}correct
Answer: E
Explanation:
Explanation
JSON data is written as name/value pairs.
A name/value pair consists of a field name (in double quotes), followed by a colon, followed by a value:
"name":"Mark"
JSON can use arrays. Array values must be of type string, number, object, array, boolean or null.
For example:
{
"name":"John",
"age":30,
"alive":true,
"cars":[ "Ford", "BMW", "Fiat" ]
}
NEW QUESTION # 389
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
Answer:
Explanation:
NEW QUESTION # 390
Which tunneling technique is used when designing a Cisco SD-Access fabric data plane?
- A. VRF Lite
- B. VXLAN
- C. VRF
- D. LISP
Answer: B
Explanation:
Explanation
NEW QUESTION # 391
Which Cisco Locator/ID Separation Protocol (LISP) device receives packets from remote site facing devices and either decapsulates the LISP packets or routes them natively?
- A. MS
- B. ETR
- C. MR
- D. ITR
Answer: B
NEW QUESTION # 392
Refer to the exhibit.
Which command must be applied to R2 for an OSPF neighborship to form?
- A. network 20.1.1.2 255.255.0.0. area 0
- B. network 20.1.1.2 255.255.255 area 0
- C. network 20.1.1.2.0.0.0.0 area 0
- D. network 20.1.1.2.0.0.255.255 area 0
Answer: C
NEW QUESTION # 393
......
Give push to your success with 350-401 exam questions: https://www.exams-boost.com/350-401-valid-materials.html
Prepare 350-401 Exam Questions Recently Updated Questions: https://drive.google.com/open?id=1r1aXAAzrdoCppz-NZXaKRVWI_FuKvCVy