NEW 2022 Certification Sample Questions 300-415 Dumps & Practice Exam
300-415 Deluxe Study Guide with Online Test Engine
Understanding functional and technical aspects of Implementing Cisco SD-WAN Solutions (300-415 ENSDWI) Security and Quality of Service
The following will be discussed in CISCO 300-415 exam dumps pdf:
- Shaping
- Configure and verify service insertion
- Policing
- Scheduling
NEW QUESTION 68
Drag and drop the route verification output from show omp tlocs from the left onto the correct explanations on the right.
Answer:
Explanation:
NEW QUESTION 69
Two sites have one WAN Edge each Each WAN Edge has two public TLOCs with no restrict configured.
There is full reachability between the TLOCs. How many data tunnels are formed on each Edge router?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 70
Which configuration allows users to reach YouTube from a local Internet breakout?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: D
NEW QUESTION 71
An engineer wants to track tunnel characteristics within a SLA-based policy for convergence. Which policy configuration will achieve this goal?
- A. Control policy
- B. App-route policy
- C. Data policy
- D. VPN membership policy
Answer: C
Explanation:
NEW QUESTION 72
An administrator must configure an ACL for traffic con1ing in from the service-side VPN on a specific WAN Edge device with circuit ID 392318933. Which policy must be used to configure this ACL?
- A. central control policy
- B. central data policy
- C. local data policy
- D. app-aware policy
Answer: C
NEW QUESTION 73 
Refer to the exhibit. An administrator is configuring a policy in addition to an existing hub-and-spoke policy for two sites that should directly communicate with each other. How is this policy configured?
- A. hub-and-spoke
- B. mesh
- C. import existing topology
- D. custom control (route and TLOC)
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/vedge/policies-book/controlpolicies
NEW QUESTION 74
On which device Is aservice FW address configured to Insert firewall service at the hub?
- A. vSmart at the branch
- B. vEdge at the branch
- C. vEdgealthehub
- D. vSmart at the hub
Answer: A
NEW QUESTION 75
Drag and drop the route verification output from show omp tlocs from the left onto the correct explanations on the right.
Answer:
Explanation:
NEW QUESTION 76
Drag and drop the REST API calls from the left onto the functions on the right.
Answer:
Explanation:
NEW QUESTION 77
Which document must you use to verify the NEC standards for a Cisco 8510 Wireless Controller?
- A. Safety Guide
- B. Deployment Guide
- C. Hardware Guide
- D. Installation Guide
Answer: D
NEW QUESTION 78
Which pathway under Monitor > Network > Select Device is used to verify service insertion configuration?
- A. System Status
- B. ACL Logs
- C. Events
- D. Real Time
Answer: D
Explanation:
Section: Management and Operations
Explanation/Reference:
NEW QUESTION 79
Refer to the exhibit Which configuration sets up direct Internet access for VPN 1?
- A. Option A
- B. Option B
- C. Option C
Answer: C
NEW QUESTION 80 
Refer to the exhibit vManage and vBond have an issue establishing a connection with each other Which action resolves the issue?
- A. Change the organization name on both controllers to match vipteta.com.
- B. Configure the encapsulation ipsec command under the tunnel interface on vManage
- C. Reconfigure the system IPs to belong to the same subnet
- D. Remove the encapsulation ipsec command under the tunnel interface of vBond
Answer: A
NEW QUESTION 81
Which hardware component is involved in the Cisco SD-WAN authentication process for ISR platforms?
- A. TPC
- B. SUDI
- C. ZTP
- D. TPMD
Answer: B
NEW QUESTION 82
Refer to theexhibit.
An engineer is troubleshooting a control connection Issue.What does "connect" mean in thishow control connections output?
- A. Control connection is up
- B. Control connection attempt is in progress
- C. Control connection is down
- D. Control connection is connected
Answer: C
NEW QUESTION 83
An organization wants to use the cisco SD-WAN regionalized service-chaining feature to optimize cost and user experience with application in the network, which allows branch routers to analyze and steer traffic toward the required network function. Which feature meets this requirement?
- A. Cloud Services Platform
b. VNF Service Chaning - B. Cloud onRamp for Colocation
- C. Cloud onRamp for laaS
Answer: B
Explanation:
https://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise-networks/sd-wan/nb-06-cisco-sd-wan-ebook-cte-en.pdf
NEW QUESTION 84
Which configuration step is taken on vManage after WAN Edge list is uploaded?
- A. Verify the device certificate
- B. Enable the ZTP process
- C. Set the device as valid
- D. Send the list to controllers
Answer: D
NEW QUESTION 85
An engineer wants to change the configuration of the certificate authorization mode from manual to automated. Which GUI selection will accomplish this?
- A. Administration > Settings
- B. Configuration > Certificates
- C. Tools > Operational Commands
- D. Maintenance > Security
Answer: B
NEW QUESTION 86
Which Cisco SD-WAN WAN Edgeplatform supports LTE and Wi-Fi?
- A. ASR1001
- B. CSR 1000v
- C. ISR 1101
- D. vEdge2000
Answer: B
NEW QUESTION 87
Scenario:
A customer network engineer has edited their OSPF network configuration and now your customer is experiencing network issues. They have contacted you to resolve the issues and return the network to full functionality.
The OSPF neighbor relationship has been lost between R1 and R3. What is causing this problem?
- A. The serial interface in R1 should be taken out of the shutdown state.
- B. The R1 network type should be changed to point-to-multipoint non-broadcast.
- C. The hello, dead and wait timers on R1 need to be reconfigured to match the values on R3.
- D. A neighbor statement needs to be configured in R1 and R3 pointing at each other.
Answer: B
Explanation:
In order for two OSPF routers to become neighbors, they must have matching network types across the links.
In this case, we see that R1 has been configured as non-broadcast and R3 is using point to point non- broadcast.
This can be seen by issuing the "show running-config" command on each router, or the "show ip ospf interface" command:
NEW QUESTION 88
......
Domain 1: Architecture
This topic comes with the following skills: explaining architecture and components of Cisco SD-WAN, such as data plane (vEdge), orchestration plane (vBond, NAT), control plane (vSmart, OMP), management plane (vManage), TLOC, vRoute, IPsec, BFD; explaining types of WAN Edge platform such as vEdges and cEdges.
300-415 dumps review - Professional Quiz Study Materials: https://www.exams-boost.com/300-415-valid-materials.html
300-415 Test Prep Training Practice Exam Questions Practice Tests: https://drive.google.com/open?id=1wbTei_4-J5QqJHG0e0VlG4jgYQebuy8R