Verified HPE0-S22 dumps Q&As - Pass Guarantee Exam Dumps Test Engine [2022]
HPE0-S22 dumps and 98 unique questions
How can you begin study for the HPE Master ASE - Server Solutions Architect (HPE0-S22) Certification Exam
Best guide For HPE Master ASE - Server Solutions Architect (HPE0-S22) Certification Exam
Quick preparation guide if you don’t have time to read complete the page
This exam validates candidates' knowledge and skills on the advanced architecture of HPE server products and solutions. This exam also tests the knowledge of Candidate advanced server architectures and associated technologies, as well as their features, characteristics, and benefits. Moreover, it also verifies knowledge to analyzing the server market, positioning HPE server solutions with customers, demonstrating business information about the server, and the relationship between HPE transformation areas and HPE products and server solutions.
NEW QUESTION 12
An architect proposes an HPE Moonshot server solution for a customer. The customer needs a single processor solution with a network switch to allow 10Gb connectivity and support for a software-defined network solution.
Which HPE Moonshot switch module meets the customer's needs?
- A. 45Gc Switch Module
- B. 45XGc Switch Module
- C. 180G Switch Module
- D. 45G Switch Module
Answer: B
NEW QUESTION 13
An architect is planning an HPE Moonshot System to host a customer Hadoop MapReduce2 application. The architect originally proposed the following:
* m710 cartridges
* HPE 45XGc switches
* HPE 4-QSFP+ Uplink Modules
The customer now needs each HPE Moonshot chassis to provide at least 1TB of memory and 40TB or local storage.
Cartridge nodes needs two 10GbE ports each.
What does the architect need to replace in the solution to meet the customer's new requirements?
- A. m710 cartridges with m710p cartridges, which support higher capacity local drives
- B. 45XGc switches with 180G switches, which provide the required two 10GbE ports to the cartridges
- C. 4-QSFP+ Uplink Modules with 16-SFP+ Uplink Modules, which provide 10GbE ports to the cartridges
- D. m710 cartridges with m350 Cartridge, which provide more memory
Answer: C
Explanation:
Explanation
NEW QUESTION 14
A customer needs to streamline monitoring for its HPE Apollo 6000 solution.
Which benefit can HPE Advanced Power Management (APM) provide to this customer?
- A. It monitors the utilization of resources such as CPU and memory.
- B. It enables HPE OneView to automatically discover and map the chassis and its servers.
- C. It discovers and inventories XL servers installed in the HPE Apollo chassis.
- D. It audits the firmware on XL servers installed in the HPE Apollo chassis.
Answer: C
NEW QUESTION 15
A software development customer's data center has servers from three different vendors. The customer plans to purchase 15 HPE c7000 enclosures that are populated with BL460c Gen9 blades. Each enclosure will be deployed with HPE OneView advanced licensing. The customer uses third-party SNMP-based management tools as well as some custom dashboards that were written to monitor the status of the datacenter.
The infrastructure management team is concerned about how to integrate HPE OneView into its management strategy.
What should the architect demonstrate?
- A. how to use HPE OneView as the dashboard for the existing monitoring tools using the REST API
- B. how to access HPE OneView data and incorporate it into the internally developed dashboards using the REST API
- C. how to point the existing servers to the new HPE OneView instance for all SNMP traps
- D. how to access HPE OneView data and incorporate it into the internally developed dashboards using the ILO RIBCL command language
Answer: B
NEW QUESTION 16
An architect is planning an HPE Moonshot System deployment. The architect plans to individually connect each iLO CM module to the management network. The customer informs the architect that this plan requires too many 1GbE ports per rack for the data center infrastructure.
What is one way that the architect can alter the plan to meet the customer's needs, while still allowing iLO access to the HPE Moonshot Systems?
- A. Configure iLO traffic to share the same adapters as production traffic. Configure VLANs on the HPE Moonshot switch modules to separate the two types of traffic.
- B. Add a second switch module and uplink module to each chassis to connect to the cartridge iLO ports. Stack the modules in different chassis and connect just one to the management network.
- C. Enable the iLO REST API on each cartridge node. The nodes will then accept iLO commands on the adapters that they use for production traffic.
- D. Keep one iLO CM Management port connected to the network. Use the iLO CM link ports on each iLO CM module to daisy chain the chassis together.
Answer: B
NEW QUESTION 17
An architect is planning an HPE Moonshot System solution to support a data analytics application. The application uses data mining.
Which type of rack configuration should the architect recommend?
- A. a configuration that has a higher ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
- B. a configuration in which the HPE Moonshot System hosts the analytics application and the data
- C. a configuration that has a lower ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
- D. a configuration that balances the ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
Answer: D
NEW QUESTION 18
View the Exhibit.
Refer to the exhibit. An architect is planning an HPE Moonshot System with m710 cartridges to support a customer application virtualization solution. The customer indicated that the maximum acceptable response time for the solution is three seconds. The architect has implemented a POC and tested a single cartridge with different numbers of user sessions.
The architect monitored resource utilization throughout the tests. The results of the test with the point at which the response time exceeded three seconds are shown, marked as the "VSI max." What should the architect conclude from this test?
- A. The memory becomes a bottleneck before other resources, so the architect should propose m400 cartridges, which provide a higher memory capacity.
- B. None of the monitored resources shows signs of being a bottleneck, so the architect should consider other factors such as the HPE Moonshot switch module.
- C. CPU becomes a limiting factor around 50 sessions, so the architect should propose at least one cartridge per 45 or 50 users.
- D. The network adapter becomes a bottleneck before other resources, so the architect should propose m710p cartridges, which provide 10GbE ports.
Answer: D
NEW QUESTION 19
A customer needs high performance computing (HPC) and a small-scale solution with up to eight processors. The solution should also provide storage in a modular form factor. The customer's HPC application is designed so that some nodes act as compute nodes while others act as storage nodes that serve data to the compute nodes.
Which HPE Apollo system is most appropriate for this situation?
- A. HPE Apollo 6000
- B. HPE Apollo r2800
- C. HPE Apollo r2200
- D. HPE Apollo 8000
Answer: C
NEW QUESTION 20
An architect is writing a response to a Request for Proposal (RFP). The customer has requested financial information on the monetary amount by which assets are valued in business records.
Which value does the architect need to consider?
- A. fair market value (FMV)
- B. net book value (NBV)
- C. total cost of acquisition (TCA)
- D. net investment value (NIV)
Answer: B
Explanation:
Explanation/Reference: https://www.seslisozluk.net/book-value-nedir-ne-demek/
NEW QUESTION 21
Under which Transformation Area do HPE Moonshot solutions with Citrix fail?
- A. Enable workplace productivity.
- B. Protect your digital enterprise.
- C. Empower a data-driven organization.
- D. Transform to a hybrid infrastructure
Answer: B
NEW QUESTION 22
An architect is planning an HPE Integrity Superdome X solution with the following nPartitions:
nPar 1= Slots 1, 3, and 5
nPar 2 = Slots 2, 4, and 6
The Superdome X solution must connect to a Fibre Channel SAN solution, which provides boot disks for the Superdome X solution.
The architect has selected a Flexible LOM adapter for each blade.
What is a valid plan for additional adapters?
- A. one 2-port FC HBA for slot 1
- B. one 2-port FC HBA each for slot 2, slot 4, and slot 6
- C. one 2-port FC HBA each for slot 1, slot 3, and slot 5
- D. one 2-port FC HBA each for slot 1 and slot 2
Answer: B
NEW QUESTION 23
A customer plans to purchase some c7000 blade enclosures equipped with Virtual Connect
FlexFabric modules to support its development and test team. The customer is concerned about frequent changes to the server blade connectivity. In the initial proposal, an architect included HPE OneView, and now the customer wants to learn how HPE OneView will address their concern.
Which HPE OneView functionality should the architect explain to the customer?
- A. the customer can create profile templates, deploy server profiles from the template, and, if necessary, use the same method to update server connectivity.
- B. the customer can use different plugins to visualize network and storage connectivity, and change them by using the drag and drop method.
- C. the customer can access HPE Virtual Connect Enterprise Manager and perform connectivity changes for all servers in the same Virtual Connect Domain Group.
- D. all external connectivity changes will be automatically discovered and server profiles will be automatically updated to reflect the change.
Answer: B
NEW QUESTION 24
A customer is planning a multi-threaded HPC solution that would benefit from threads running in parallel.
The architect selects the HPE Apollo 6000 and needs to choose between the HPE XL230a and the XL250a compute tray.
What is one reason for choosing the XL250a tray?
- A. The HPE XL250a server delivers dual processor performance.
- B. The HPE XL250a server supports dual accelerators.
- C. The HPE XL250a server provides full length PCIe expansion slots.
- D. The HPE XL250a server supports DDR4 HPE Smart Memory.
Answer: B
Explanation:
The HPE ProLiant XL250a Gen9 Server delivers 2P performance for your budget with dual accelerator support, while leveraging the HPE Apollo 6000 System and its modular flexibility and rack-scale efficiency. This server features the Intel® Xeon® E5-2600 v3/v4 series processors and 16 DIMM slots are ready with DDR4 2133 (1024 GB maximum)/2400 (2048 GB maximum) MHz memory and HPE Smart Memory.
References:
NEW QUESTION 25
A customer is working on a project to enable workplace productivity. The customer needs a solution that will allow employees to connect to their workplace environment by using a personal mobile phone, tablet, laptop, or desktop computer. Employees must be able to stop and resume work seamlessly while travelling between offices.
Which purpose-built hardware can the customer use to help achieve this goal?
- A. HPE Apollo 2000 to provide hosted physical desktop and application virtualization to mobile users
- B. HPE Moonshot to provide hosted physical desktop and application virtualization t mobile users
- C. HPE Apollo 2000 to provide VDI access to mobile users
- D. HPE Moonshot to provide VDI access to mobile users
Answer: B
NEW QUESTION 26
An architect is planning an HPE Integrity Superdome X solution. One nPartition will include two HPE BL920s Gen9 blades. After discussions and testing, the architect determines that the nPartition requires more memory than initially planned.
Which approach should the architect recommend to the customer to ensure optimum performance?
- A. Avoid using all memory channels on a processor
- B. Provision each blade in the nPartition with the same amount of memory
- C. Favor using lower capacity DIMMs to fill more memory slots on each channel
- D. Add DIMMs in multiples of 12 even if this means adding more capacity than necessary
Answer: B
NEW QUESTION 27
An architect has selected the FlexibleLOM option fur HPE XL230a compute trays, which will host an HPC application.
When should the architect select a FlexibleLOM adapter that supports Fibre Channel over Ethernet (FCoE)?
- A. when the application requires additional bandwidth and needs a solution for load sharing traffic over multiple links
- B. when the application uses a Fibre Channel storage area network (SAN) for its shared storage solution
- C. when the application uses parallel computing and relies on Fibre Channel to reduce latency for communications between compute nodes
- D. when the application requires high throughput between processors and disk drives local to the same compute tray
Answer: C
NEW QUESTION 28
When designing a Superdome X configuration for a customer, which storage configuration should the architect choose?
- A. booting from a local direct attached SSD disk and a mezzanine FC port for user data storage on an MSA 2040
- B. one mezzanine FC port on one nPar dedicated for booting from an MSA 2040 and an additional FC port for user data
- C. booting from a local direct attached SSD disk and a mezzanine TOE N/W port for user data accessing an MSA 2040 using iSCSI
- D. a single mezzanine FC port in each nPar for common access to all volumes on an HPE
3PAR StoreServ
Answer: D
NEW QUESTION 29
......
HPE0-S22 Dumps for Pass Guaranteed - Pass HPE0-S22 Exam: https://www.exams-boost.com/HPE0-S22-valid-materials.html