Ensure Success With Updated Verified NCA-6.5 Exam Dumps [2024]
Exam Materials for You to Prepare & Pass NCA-6.5 Exam.
NEW QUESTION # 62
A customer requires the ability to block all network traffic between their VDI VMs and their application VMs running on their Nutanix AHV clusters.
What Nutanix product would meet this requirement?
- A. Beam
- B. Flow
- C. Calm
- D. Era
Answer: B
NEW QUESTION # 63
Which Task is Required to initiate a live migration of VMs between two cluster?
- A. Press Migrate Button on the Protection Domain
- B. Promote Metro Availability Protection Domain
- C. Perform a Leap Planned Failover
- D. Replicate VM Recovery Point
Answer: A
NEW QUESTION # 64
An administrator wants to evaluate the overall health of the Nutanix cluster. What should be the first step?
- A. Run Xi Beam
- B. Run Log Collector
- C. Run NCC
- D. Run LCM
Answer: C
NEW QUESTION # 65
Refer to the exhibit.
Management has tasked an administrator to restore the VM, VMforQuestion to a previous point in time (3:20pm), to recover from a corrupted set of files.
Which snapshot should the administrator choose, and which action(s) should be executed?
- A. Snapshot 2 Details review restore points. then Clone
- B. Snapshot 1 Details, review restore points. then Clone
- C. Snapshot 2 Restore
- D. Snapshot 1, Restore
Answer: B
NEW QUESTION # 66
What should an administrator do after a Protection Domain is migrated?
- A. Power on Virtual Machines
- B. Restore Virtual Machines
- C. Register Virtual Machines
- D. Mount datastores on Hosts
Answer: D
Explanation:
After a Protection Domain is migrated, an administrator should mount datastores on hosts to make sure that the data is accessible by the virtual machines running on those hosts. Reference: Nutanix Certified Associate 6.5 Exam Study Guide, page 54
NEW QUESTION # 67
When Does AOS automatically Generate a case with nutanix Support?
- A. When disk space usage is high above 90%
- B. When losing network connectivity to the CVM
- C. On failure of a scheduled NCC check
- D. For every alert detected by pulse Diagnostics
Answer: C
Explanation:
Explanation Explanation/Reference: Please Re Check From your Side and let me know if the question correction is required
NEW QUESTION # 68
An administrator needs to expand a Nutanix cluster that is tagging the network traffic at the CVM and AHV level. However, the administrator doesn't remember the configured VLAN ID.
Which command can the administrator run to find the correct VLAN ID from the CVM?
- A. ifconfig
- B. manage-ovs
- C. acli
- D. ovs-vscl
Answer: D
NEW QUESTION # 69
In Prism Element, to which object are policies such as replication factor and storage efficiency settings applied?
- A. Storage Pool
- B. vBlock
- C. Virtual Machine
- D. Container
Answer: D
Explanation:
In Prism Element, policies such as replication factor and storage efficiency settings are applied to Containers. A container is a logical grouping of one or more storage pools and defines the storage resources available to virtual machines. By applying policies to a container, you can set the replication factor, storage efficiency settings, and other storage-related settings for all of the virtual machines that are associated with that container. This is a fundamental concept in Nutanix Platform.
NEW QUESTION # 70
Which LCM feature simplifies upgrades on clusters without Internet access?
- A. One-Click Upgrade
- B. FTP
- C. NCC
- D. Direct Upload
Answer: D
Explanation:
Direct Upload is a LCM feature that simplifies upgrades on clusters without Internet access. It allows users to upload the desired version of the software to the cluster using a USB drive or other portable storage device, and then install it without the need to access the Internet. Reference: https://portal.nutanix.com/page/documents/details?targetId=Platform-Administrator-Guide-v5_7:pag-lcm-direct-upload-c.html
NEW QUESTION # 71
What is required to successfully live migrate a VM Between two AHV clusters?
- A. Both clusters must be managed by the same prism central
- B. Stretch L2 networks across the primary and recovery sites
- C. Configure a Protection domain with synchronous replication
- D. Install and Configure the witness VM on a third Site.
Answer: C
Explanation:
Please Re Check From your Side and let me know if the question correction is required
NEW QUESTION # 72
What is the maximum jumbo frame MTU supported by host network interfaces and Guest VMs?
- A. 1500 bytes
- B. 4096 bytes
- C. 2048 bytes
- D. 9000 bytes
Answer: D
NEW QUESTION # 73
A 10 GbE link has failed on Node A within the following cluster environment:
Four-node AHV-based cluster
All node have only two 10 GbE ports connected to the network
Active-backup is configured
What impact will user VMs experience from this issue?
- A. Will failover to another node
- B. Will shutdown
- C. Will have no impact
- D. Performance will Decrease
Answer: C
Explanation:
In Active-backup mode, one network interface is active while the other is in standby mode. If the active interface fails, the standby interface takes over, providing seamless failover without any disruption to user VMs. In this case, since the cluster has two 10 GbE ports on each node, and only one link has failed, the user VMs will continue to operate normally using the second link.
NEW QUESTION # 74
How is the destination cluster determined when uploading images from the local workstation to Prism Central?
- A. Selected manually
- B. Selected sequentially
- C. Selected randomly
- D. Selected alphabetically
Answer: D
Explanation:
When uploading images from a local workstation to Prism Central, the destination cluster is determined based on the alphabetical order of the cluster names. Specifically, the first available cluster in alphabetical order is selected as the destination for the image upload.
This behavior is documented in the Prism Central Admin Guide, which states that when you upload an image to Prism Central, "the image is stored in the first cluster that has sufficient space and starts with the letter that appears first in the image name."
NEW QUESTION # 75
What is the maximum transmission units (MTU) supported by Nutanix CVM?
- A. 9000 bytes
- B. 1500 bytes
- C. 9216 bytes
- D. 1472 bytes
Answer: B
NEW QUESTION # 76
An administrator needs to deploy a two-node cluster on a new ROBO Site. What is required to maintain High Availability in the case of a node failure?
- A. Windows Failover Clustering
- B. Metro-Availability
- C. Async Replication
- D. Witness VM
Answer: B
Explanation:
Metro-Availability is a feature of Nutanix clusters that provides high availability in the case of a node failure. It requires two nodes and uses asynchronous replication between the two sites to ensure that data is replicated across the two sites in real-time. This ensures that, in the case of a node failure, the data is still available and the cluster can remain operational. Reference: https://portal.nutanix.com/page/documents/details?targetId=Platform-Administrator-Guide-v5_7:pag-metro-availability-c.html
NEW QUESTION # 77
When Does AOS automatically Generate a case with nutanix Support?
- A. When disk space usage is high above 90%
- B. When losing network connectivity to the CVM
- C. On failure of a scheduled NCC check
- D. For every alert detected by pulse Diagnostics
Answer: C
NEW QUESTION # 78
Which product or feature is most suitable for deploying a Microsoft SQL cluster in a Nutanix environment?
- A. Volumes
- B. NFS shares
- C. Files
- D. Objects
Answer: D
Explanation:
In a Nutanix environment, the product or feature most suitable for deploying a Microsoft SQL cluster is Nutanix Objects. Nutanix Objects is a S3-compatible object storage solution that provides a highly scalable and durable storage for unstructured data. It is built on top of the Nutanix Distributed File System (NDFS) and provides a high-performance, scalable, and highly available storage solution.
One of the key features of Nutanix Objects is its ability to support Microsoft SQL Server Always On Availability Groups (AAG) on S3 object storage. This allows you to deploy a highly available SQL cluster on Nutanix, with the ability to failover SQL services to a different node in the event of a failure, and provide high availability and disaster recovery for SQL databases.
NEW QUESTION # 79
Which platform supports firmware updates through LCM?
- A. * Lenovo HX
- B. Huawei Atlas
- C. Dell PowerEdge
- D. Hitachi Vantara
Answer: A
NEW QUESTION # 80
Which Nutanix storage service can store Petabytes of unstructured data and supports S3 APIs?
- A. Volumes
- B. DSF
- C. Files
- D. Objects
Answer: D
Explanation:
Nutanix Objects is a storage service that can store petabytes of unstructured data and supports S3 APIs. It is a distributed object store that provides an easy-to-use interface for storing and managing objects and data. It also provides advanced features such as versioning, replication, encryption, and access control. Reference: https://portal.nutanix.com/page/documents/details?targetId=Platform-Administrator-Guide-v5_7:pag-objects-c.html
NEW QUESTION # 81
......
Nutanix NCA-6.5 exam is a vendor-neutral certification that is recognized globally by the IT industry. Nutanix Certified Associate (NCA) v6.5 exam certification is designed to help IT professionals to gain knowledge and skills in Nutanix technology and improve their professional credentials. Nutanix has become one of the most popular hyper-converged infrastructure solutions, and the NCA-6.5 certification is highly regarded by companies that use Nutanix technology.
Updated NCA-6.5 Certification Exam Sample Questions: https://www.exams-boost.com/NCA-6.5-valid-materials.html
Pass Your NCA-6.5 Exam at the First Try with 100% Real Exam: https://drive.google.com/open?id=1MkoW-kzGY837fZTfZYSmtTz_lPTI05uV