[Jan 27, 2022] HPE6-A72 Sample with Accurate & Updated Questions
HPE6-A72 Exam Info and Free Practice Test | Exams-boost
How to schedule Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam
To apply for the Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam, You have to follow these steps:
- Step 1: Go to the Aruba Certified Switching Associate (HP HPE6-A72) Professional Official Site. You must first create an account, use your email address to register. You must purchase your training through your local distributor. If you are a partner, you must first create an account on the Partner Portal. You must use your company email address to register.
- Step 2: Read the instruction Carefully
- Step 3: Follow the given steps
- Step 4: Apply for the Aruba Certified Switching Associate (HP HPE6-A72)-Professional Exam
For queries, contact your regional training team:
Get access to The Learning Center and get an HPE Learner ID. If this certification demands a written or online exam (HPE0 or HPE6 or HPE2), then generate a user profile with Pearson VUE, exam vendor for proctored/online exams. Practical exams are given through PSI or Aruba Education Services, consequently, no Pearson VUE user profile is needed.
NEW QUESTION 10
ServiceOS login: admin
SVOS> password
Enter password: ********
Confirm password: ********
The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.
What is the default password that is required for the admin account while under the Service OS console?
- A. "forgetme!"
- B. No password is set for this account.
- C. "password"
- D. The same login password that has lost originally.
Answer: A
Explanation:
Explanation/Reference: https://www.arubanetworks.com/techdocs/ArubaOS_83_Web_Help/Content/ArubaFrameStyles/ Management_Utilities/enab_radsec_reset_admin_enabl_pwd.htm
NEW QUESTION 11
With what other technology does Half Duplex communication closely match?
- A. CB radio using push-to-talk
- B. a mobile phone call
- C. point-to-point connections between two switches allowing concurrent transmit and receive
- D. a pair of fiber optic strands allowing transmit on one and receive on the other at the same time
Answer: A
NEW QUESTION 12
Refer to the exhibit.
The Aruba 8400 in the exhibit is member 2 of a VSX stack.
Which command will enter the interface sub configuration mode for the port, indicated by the orange square?
- A. 8400(config)# interface 1/4/15
- B. 8400(config)# interface 1/7/16
- C. 8400(config)# interface 2/4/15
- D. 8400(config)# interface 2/3/17
Answer: C
NEW QUESTION 13
You need to remote into an AOS-CX switch using SSH in order to update the management IP address for future connections. Unfortunately, you mis-configured the IP address and are now locked out of the switch.
What command could you have issued before making changes that would have recovered the original switch configuration after ten minutes?
- A. checkpoint rollback 10
- B. checkpoint auto 10
- C. checkpoint auto confirm 10
- D. boot system secondary 10
Answer: B
NEW QUESTION 14
What command displays information regarding the secondary image installed on an AOS-CX switch?
- A. show secondary
- B. show version detail
- C. show images
- D. show version
Answer: C
NEW QUESTION 15
Refer to the exhibit.
The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches. What is the output of this command?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 16
What is Deep Packet Inspection?
- A. a concept that applies to firewalls, when examining packets only up through Layer 4
- B. a function of Policy Based Routing that examines the entire IPv4 header to forward traffic based on factors other than destination address
- C. a machine learning method of packet inspection for the purpose of choosing which dynamic routing protocol to automatically assign
- D. a firewall process of examining the packet header all the way to Layer 7 in order to determine if the packet should be permitted or denied
Answer: D
NEW QUESTION 17
Match each description to the correct term.
Answer:
Explanation:
NEW QUESTION 18
Which switch supports a maximum of 8 line-cards, 3 fabric modules, and 2 management cards?
- A. Aruba 5412r
- B. Aruba 8408
- C. Aruba 8400
- D. Aruba 6410
Answer: C
NEW QUESTION 19
Refer to the exhibit.
Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.
Which configuration will correct the issue?
- A. Host-B: assign the default-gateway address 10.1.20.181
- B. Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181
- C. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.1
- D. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181
Answer: D
NEW QUESTION 20
Refer to the exhibit.
What command (output shown above) gives the optics serial number and part number information?
- A. show interface physical
- B. show interface transceiver
- C. show interface optics
- D. show inventory
Answer: B
NEW QUESTION 21
You have completed a successful VSF stack between two switches.
Without manually assigning a backup switch, what is the expected output when issuing a show vsf command?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 22
Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.
Answer:
Explanation:
NEW QUESTION 23
Click on the colored box that corresponds with the line that best represents Broadcast traffic flow.
Answer:
Explanation:
NEW QUESTION 24
Match the terms to the correct layer of the OSI model.
Answer:
Explanation:
NEW QUESTION 25
The section in blue can be ignored.
SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 26
......
Understanding functional and technical aspects of Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam Design for Stacking
The following will be discussed in HP HPE6-A72 exam dumps:
- Describe and design HPE StoreServ integration with StoreOnce (RMC-V/RMC-X/Veeam)
- Vertical Switching Framework Arrangement
- Describe how HPE storage solutions perform workload-balancing, creating a private, highly-available, intelligent storage cloud
- Vertical Switching Framework
- Stacking Advantages
- Vertical Switching Framework Failover
- Vertical Switching Framework Link
- Control, Management, and Data Planes
- Centralized authority and administration plane
- Categorized Data Plane and Shared Link Aggregation
- Tracking Layer 2 traffic: Multicast, and Unicast
The benefit in Obtaining the Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam
This certification is an industry-recognized credential from Aruba Networks that assesses the applicant's understanding of fundamental concepts and skills on Aruba OS and the characteristics that exist on Cloud & Enterprise packages. When it comes to employment, this certification is a career game-changer that will advance you closer to achieving your dream profession.
Some more benefits are:
- Opportunities to grow your professional network
- Generate new leads and gain new projects
- Planning for a better future
- Better Salary
- Better avenues for improving professional expertise
Pass HP HPE6-A72 Premium Files Test Engine pdf - Free Dumps Collection: https://www.exams-boost.com/HPE6-A72-valid-materials.html
New 2022 Realistic HPE6-A72 Dumps Test Engine Exam Questions in here: https://drive.google.com/open?id=1tqVZbGQx40WmV3MUTmOe9FA5dkV3McTn