Quality HPE6-A72 PDF Dumps - HPE6-A72 Exam Questions [Q24-Q45]

Share

Quality HPE6-A72 PDF Dumps - HPE6-A72 Exam Questions

Most UptoDate HP HPE6-A72 Exam Dumps PDF 2021


For more info about Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam

Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam

 

NEW QUESTION 24
Match each description to the correct management tool for Aruba AOS-CX.

Answer:

Explanation:

 

NEW QUESTION 25
Which two port characteristics must match between LAG interfaces? (Choose two.)

  • A. Media type
  • B. Chassis number
  • C. Member ID
  • D. Duplex
  • E. Port number

Answer: A,D

 

NEW QUESTION 26
The following command is issued:
Switch# checkpoint rollback start
What is the result?

  • A. The command will fail because rollback commands must be issued from global-config mode.
  • B. The switch will revert the running-configuration to the checkpoint called 'start1 without a reboot.
  • C. The switch will use the checkpoint 'rollback1 as the starting configuration on next reboot.
  • D. The command will fail because it is incomplete.

Answer: B

 

NEW QUESTION 27
You have completed a successful VSF stack between two switches.
Without manually assigning a backup switch, what is the expected output when issuing a show vsf command?

  • A. Option D
  • B. Option B
  • C. Option A
  • D. Option C

Answer: A

 

NEW QUESTION 28
Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.

Answer:

Explanation:

 

NEW QUESTION 29
What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?

Answer: B

 

NEW QUESTION 30
What are the benefits of a 3-Tier design over a 2-Tier? (Choose two.)

  • A. Lowering the cost of a deployment due to needing less switches overall.
  • B. Better scalability in a campus with a large number of buildings.
  • C. Offloading processing from the Core without routing at the Access layer.
  • D. Can use lower speed links between Core to Aggregation and Aggregation to Access given the use of an Aggregation layer.
  • E. Gaining the flexibility to connect the Data-Center to any Access layer switch.

Answer: B,C

 

NEW QUESTION 31
What connectivity commands are available on AOS-CX switches? (Choose two.)

  • A. ping
  • B. traceroute
  • C. tracert
  • D. netstatus
  • E. pathping

Answer: A,B

 

NEW QUESTION 32
Refer to the exhibit.

The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?

  • A. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.
  • B. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
  • C. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.
  • D. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.

Answer: A

 

NEW QUESTION 33
Which two statements are true regarding Checkpoints on Aruba switches? (Choose two.)

  • A. Stacking switches using VSF or VSX will disable the Checkpoint feature.
  • B. Rolling back to a prior checkpoint triggers a reboot of the switch.
  • C. A checkpoint is a snapshot of the running-configuration and relevant metadata at the time the checkpoint was created.
  • D. Checkpoints are available on AOS 5400R switches, as well as on all AOS-CX switches.
  • E. System-generated checkpoints are created after a configuration change and 5 minutes of inactivity.

Answer: C,D

 

NEW QUESTION 34
Click on the colored box that corresponds with the line that best represents Unicast traffic flow.

Answer:

Explanation:

 

NEW QUESTION 35
What is Deep Packet Inspection?

  • A. a machine learning method of packet inspection for the purpose of choosing which dynamic routing protocol to automatically assign
  • B. a firewall process of examining the packet header all the way to Layer 7 in order to determine if the packet should be permitted or denied
  • C. a concept that applies to firewalls, when examining packets only up through Layer 4
  • D. a function of Policy Based Routing that examines the entire IPv4 header to forward traffic based on factors other than destination address

Answer: B

 

NEW QUESTION 36
Which two statements accurately describe the features of NetEdit? (Choose two.)

  • A. NetEdit can be used to configure and validate any third-party device that supports SSH and REST access.
  • B. NetEdit can run on a mobile device using Android or Apple IOS.
  • C. NetEdit supports viewing and editing multiple devices using a single deployment plan.
  • D. NetEdit can perform configuration and compliance validation.
  • E. NetEdit includes trial licensing for up to 10 nodes.

Answer: C,D

 

NEW QUESTION 37
Refer to the exhibit.

All switches are running Aruba OS-CX. While working in the terminal of Access-2, you are unable to reach Server-1 using SSH.
What is the correct command to ping Server-1 from Access-2 to test reachability?

  • A. Access-2# ping 172.16.1.97 vrf mgmt
  • B. Access-2# ping 172.16.1.97 vrf default
  • C. Access-2# ping6 172.16.1.97 vrf mgmt.
  • D. Access-2# ping 172.16.1.97

Answer: A

 

NEW QUESTION 38
What is a benefit of choosing a 3-Tier design with routing at the Aggregation layer?

  • A. Using access control lists (ACLs) at the Core to improve performance
  • B. Connecting WAN/MPLS and Data center access to the Aggregation layer
  • C. Better Core router performance by offloading processing
  • D. Shifting endpoint access to the Aggregation layer from the Access layer

Answer: C

 

NEW QUESTION 39
Click on the colored box that corresponds with the line that best represents Broadcast traffic flow.

Answer:

Explanation:

 

NEW QUESTION 40
Refer to the exhibit.

You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?

  • A. Access-2# configure
    Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
  • B. Access-2# configure
    Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
  • C. Access-2# configure
    Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2
  • D. Access-2# configure
    Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

Answer: B

Explanation:
This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

 

NEW QUESTION 41
You need to remote into an AOS-CX switch using SSH in order to update the management IP address for future connections. Unfortunately, you mis-configured the IP address and are now locked out of the switch.
What command could you have issued before making changes that would have recovered the original switch configuration after ten minutes?

  • A. checkpoint auto confirm 10
  • B. boot system secondary 10
  • C. checkpoint auto 10
  • D. checkpoint rollback 10

Answer: C

 

NEW QUESTION 42
Which two options are the Layer 2 protocols? (Choose two.)

  • A. STP
  • B. 802.11af
  • C. 802.1Q
  • D. RIP
  • E. IPSec

Answer: A,C

 

NEW QUESTION 43
Refer to the exhibit.

What command (output shown above) gives the optics serial number and part number information?

  • A. show interface optics
  • B. show inventory
  • C. show interface transceiver
  • D. show interface physical

Answer: C

 

NEW QUESTION 44
What are the commands to disable SSH and HTTPS services from the default VRF?

  • A. Core-1# no ssh server vrf default Core-1# no https-server vrf default
  • B. Core-1(config)# no ssh server enable Core-1(config)# no https-server enable
  • C. Core-1(config)# no ssh server Core-1(config)# no https-server
  • D. Core-1(config)# no ssh server vrf default Core-1(config)# no https-server vrf default

Answer: D

 

NEW QUESTION 45
......


Understanding functional and technical aspects of Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam Design for Spanning Tree Protocol

The following will be discussed in HP HPE6-A72 dumps:

  • Standard Gateway
  • IP Routing - Section 2
  • Scalability problems
  • Explain how to manage firmware with HPE OneView
  • Similar Spanning Tree
  • Floating routes
  • IP Routing Service
  • Describe the processto configure networksin HPE OneView
  • Inactive routes
  • Part 2 Packet Transmission
  • Intro to Variable refrigerant flow
  • Overview
  • Load balancing
  • Link Aggregation Control Protocol
  • VRRP
  • Excessive network
  • Designated Router and Backup Designated Router
  • Load Balancing
  • L2 loops
  • DHCP Internet Protocol Helper Address
  • Link State Database
  • Preempt
  • 802.1w summary
  • OSPF Router-ID and Hello Messages
  • Describe Hewlett Packard Enterprise (HPE) OneView managed device support for HPE Synergy, HPE BladeSystem, and HPE ProLiant servers
  • Administrative Distance
  • Static Aggregate
  • Latent interfaces
  • Classless inter-domain routing
  • Coordination
  • Interior Gateway Protocol vs Exterior Gateway Protocol
  • Explain how to manage and configure facilitiesinfrastructure (racks, PDUs, etc)
  • Adding and configuring devices under management in HPE OneView
  • Utilizing cost to manage routes
  • Fundamental operation
  • Explain how to add, configure, and manage storage systemsin HPE OneView
  • Route preference and convergence
  • Need for third layer redundancy.
  • Routing of Inter-VLAN
  • 802.1w domain arrangement
  • Distance Vector vs Link State

 

100% Free Aruba Certified Switching Associate (ACSA) V1 HPE6-A72 Dumps PDF Demo Cert Guide Cover: https://www.exams-boost.com/HPE6-A72-valid-materials.html

PDF Exam Material 2021 Realistic HPE6-A72 Dumps Questions: https://drive.google.com/open?id=1UX9dgLIc2ctMLjlcXfKaoo954VWFwTg4